Mold Remediation Services Dallas Homeowners Rely On
Every job starts with a real inspection, not a phone estimate. We test, document, and explain what we find before any containment goes up.
- Written scope firstYou see the plan before we start
- Containment before removalSealed and scrubbed before anything comes down
- Photos at every stepYou get images of what we found
- Daily cleanupWe leave the space tidy each day
Mold Remediation Services Dallas Homeowners Rely On
Every job starts with a real inspection, not a phone estimate. We test, document, and explain what we find before any containment goes up.
Mold Inspection and Testing
We use thermal imaging cameras, moisture meters, and boroscopes to find hidden moisture behind walls, under floors, and above ceilings. Air and surface samples go to an accredited lab.
Black Mold Removal
Black mold removal Dallas TX requires containment first. We seal the work area with polyethylene sheeting, run negative air machines with HEPA filters, then remove affected drywall and insulation.
Attic Mold Removal
Dallas attics hit 140 degrees in summer, and roof leaks or poor ventilation feed mold fast.
Crawl Space Mold Remediation
Crawl spaces trap humidity and condensation, especially after heavy spring rains. We remove moldy insulation and debris, treat joists and subfloor with antimicrobial spray, and install encapsulation coating where needed.
Basement Mold Remediation
Basement mold usually traces back to slab leaks, foundation seepage, or failed sump pumps. We remove affected drywall and insulation, HEPA vacuum the space, and treat with antimicrobial spray.
HVAC Mold Remediation
HVAC mold spreads spores through every room. We inspect the air handler, evaporator coil, and ductwork with boroscopes, then clean and sanitize affected components.
Drywall Mold Removal and Repair
Moldy drywall comes out, not gets painted over. We cut back to clean material, bag and remove affected sections, then treat framing with antimicrobial spray.
Air Duct Cleaning and Sanitization
Ductwork traps dust, spores, and debris that recontaminate a clean space. We use HEPA vacuuming and air scrubbers to clean the system, then apply Benefect or Concrobium sanitizer.
Antimicrobial Treatment
After removal, we treat all exposed framing and surfaces with antimicrobial spray. We use products like Fiberlock ShockWave, Concrobium, and RMR-86 depending on the surface and mold type.
Commercial Mold Remediation
Offices, retail spaces, restaurants, and warehouses need fast turnaround and documentation for insurance and health departments.
Residential Mold Remediation
From a single bathroom wall to a full attic, we handle residential mold remediation services Dallas homeowners need.
Apartment and Condo Mold Remediation
Multi-unit buildings need coordination with property managers and tenants. We schedule around occupancy, contain each unit separately, and document everything for the HOA or management company.
How Our Mold Remediation Process Works
We follow the IICRC S520 standard on every job: inspect, contain, remove, clean, and verify. You get a written scope before we start and a verification report when we finish.
Inspection and Testing
A technician arrives with a thermal imaging camera, moisture meter, and boroscope. We trace moisture, map the affected area, and take air or surface samples if needed. You get a written report with photos and lab results.
Containment and Air Scrubbing
We seal the work area with polyethylene sheeting and run negative air machines with HEPA filters. This keeps spores from spreading to clean rooms. Air scrubbers run the entire time we are on site.
Removal and Treatment
Affected drywall, insulation, and porous materials come out, bagged, and disposed of. We HEPA vacuum all surfaces, then apply antimicrobial spray like Fiberlock ShockWave or Concrobium. Framing gets treated before any rebuild.
Verification and Rebuild
We coordinate post-remediation testing with an independent lab. Once clearance passes, we install mold-resistant drywall and finish the area. You get a final report with photos and lab results for your records or insurance claim.
Mold Remediation Dallas TX Questions Answered
Here are the questions we get most often about mold remediation in Dallas.
Still have a question?
Describe what you are seeing and we will point you to the right next step.
(214) 817 0145Most single-room jobs in Dallas run $1,200 to $2,800 in 2026. A full attic or multi-room scope typically runs $3,500 to $8,500. Whole-home or commercial projects can exceed $25,000. The final price depends on the square footage affected, the type of material, and how much containment is needed. We inspect first and give you a written scope before any work starts.
Dallas Mold Remediation is a local company that has handled mold removal Dallas Texas jobs since 2015. We are IICRC WRT and AMRT trained, OSHA 10 compliant, and hold a Texas Mold Remediation License. We serve all of Dallas County, from Downtown to Cedar Hill. Call (214) 817 0145 to schedule an inspection.
It depends on the cause. Sudden events like burst pipes or storm damage are often covered. Long-term neglect or gradual leaks usually are not. We provide full documentation, moisture readings, lab results, and a written scope that follows IICRC S520 standards. Most adjusters accept our reports. We can also coordinate directly with your insurance company.
A single bathroom wall usually takes one to two days. A full attic or crawl space typically takes three to five days. Whole-home projects can run one to two weeks. The timeline depends on the square footage, how many materials are affected, and whether HVAC cleaning is needed. We give you a day-by-day schedule before we start.
Dallas humidity is the biggest factor, but the trigger is almost always a moisture source: roof leaks, plumbing drips, HVAC condensate lines, slab leaks, or poor attic ventilation. Once moisture sits for 24 to 48 hours, mold can start growing. We trace the source with thermal imaging and moisture meters, then document it so you can fix the cause and stop the mold from returning.
Need Mold Remediation Dallas TX? Call Today.
(214) 817 0145Same-day inspections across Dallas County. Written scope before work starts. Call (214) 817 0145 and we will trace the moisture, contain the area, and remove the mold.
Contact Dallas Mold Remediation
Call (214) 817 0145 or email info@dallasmoldremediation.com to schedule an inspection. We answer the phone Monday through Friday, 8:00 AM to 6:00 PM, and we return after-hours messages first thing the next morning. Same-day inspections are available across Dallas County when you call before noon.