For Homes
We work in houses across Dallas County every day. Our team protects your floors, furniture, and daily routine while we remove mold.
- Musty odor in a room
- Dark spots on drywall
- Water stain on ceiling
Residential Mold Remediation in Dallas That Gets Your Home Dry
Residential Mold Remediation in Dallas means finding the moisture source, containing the growth, and removing mold from your home's structure and air. We handle home mold remediation Dallas Texas for families in Preston Hollow, Oak Cliff, Lakewood, and across Dallas County. If you smell something musty or see dark spots after a roof leak or AC drip, we inspect, test, and fix it right.
Moisture mappingContainment setupClearance testing- We documentPhotos and readings at every step
- We containSealed work zones with negative air
- We verifyLab results before we rebuild
- We explainWhat we found and why
What Our Residential Mold Remediation Includes
Every job includes inspection, containment, removal, cleaning, drying, and clearance testing. Rebuild is included when you want us to handle it. Here is what you get as part of the standard scope.
Full Inspection and Lab Testing
Thermal imaging, moisture meter readings, air samples, and surface swabs. You get a written report with lab results showing mold type and spore count before we start work.
Containment and Air Filtration
Polyethylene sheeting, negative air machines, and HEPA air scrubbers keep spores from spreading to clean areas of your home. We seal vents and doorways in the work zone.
Removal and Antimicrobial Treatment
Contaminated drywall, insulation, and trim come out and get bagged. We HEPA vacuum all exposed surfaces and apply antimicrobial spray and fogger treatment to framing.
Drying and Clearance Testing
Dri-Eaz dehumidifiers and air movers run until framing moisture is below 16 percent. Post-remediation air samples go to the lab, and you get the clearance report.
Reconstruction and Finish
New insulation, mold-resistant drywall, tape, float, texture, and paint. We match existing finishes so the repaired area blends with the rest of the room.
Documentation for Insurance
Photos, moisture logs, written scope, and lab reports packaged for your adjuster. We can communicate directly with your insurance company to speed up the claim.
Homes and businesses.
The approach is the same for a home and a business. What changes is the access, the schedule and who needs the paperwork.
For Businesses
Property managers and business owners call us for tenant spaces and common areas. We work after hours to keep your doors open.
- Tenant mold complaint
- Roof leak in office
- HVAC mold in retail space
What Residential Mold Remediation in Dallas Actually Involves
A plain-language look at what Residential Mold Remediation involves and when it is needed.
See how it worksResidential Mold Remediation in Dallas is the process of locating mold growth inside a house, stopping the water source that feeds it, and physically removing contaminated materials under containment. We set up polyethylene sheeting and negative air machines to keep spores from spreading to clean rooms. Technicians use a thermal imaging camera and moisture meter to trace hidden water behind drywall and under flooring. Affected drywall, insulation, and trim get removed, bagged, and disposed of, then we clean surfaces with antimicrobial spray and HEPA vacuum every exposed cavity before rebuilding.
Dallas homes deal with mold pressure most of the year. Summers push attic temperatures past 140 degrees, and when an AC drain line clogs or a pan overflows, that heat turns a small leak into visible growth in 48 to 72 hours. Spring storms drive rain sideways into brick veneer and around window flashing. We see the same pattern in older M Streets bungalows and newer builds alike: a slow plumbing leak behind a cabinet, a musty odor, then black mold on the back of the drywall. If you have been searching for residential mold remediation near me Dallas TX, the fix starts with finding that water.
Find the water, remove the mold, prove it is gone with lab results.
- What it is
- Removing mold growth from a home's structure and air after finding and stopping the water source.
- When you need it
- Musty odors, visible dark spots, recent water leaks, or lab tests showing elevated mold spores.
- What to expect
- Inspection, containment, removal, drying, clearance testing, and rebuild. Most jobs take seven to fourteen days.
Our Residential Mold Remediation Process
Every job follows the same five steps, from the first call to the final walkthrough. Here is what you can expect when our truck pulls up.
-
Inspection and Testing
A technician walks the home with a thermal imaging camera and moisture meter, checking attic decking, crawl spaces, under sinks, and around HVAC equipment. We take air samples and surface swabs, then send them to a lab. You get results in 24 to 48 hours showing the mold type and spore count. This step usually takes 60 to 90 minutes.
- Inspect
- Test
- Report
-
Containment Setup
We seal doorways and vents with polyethylene sheeting and install a negative air machine to pull air out of the work zone through a HEPA filter. A boroscope lets us check inside wall cavities without tearing everything open. Setup takes two to four hours depending on the size of the affected area.
- Seal
- Filter
- Contain
-
Removal and Cleaning
Contaminated drywall, insulation, and trim come out and get bagged for disposal. We HEPA vacuum every exposed surface, then apply antimicrobial spray to framing and sheathing. A fogger reaches into corners and crevices that a spray bottle cannot. This phase runs one to three days for most Dallas homes.
- Remove
- Clean
- Treat
-
Drying and Verification
Dri-Eaz dehumidifiers and air movers run until framing moisture reads below 16 percent on our meter. That usually takes two to four days. We take clearance samples and send them to the lab. If spores are still elevated, we reclean at no extra charge before we close anything up.
- Dry
- Verify
- Clear
-
Reconstruction and Walkthrough
We install new insulation and mold-resistant drywall, then tape, float, texture, and paint. The final walkthrough covers the lab report, photos of the work, and maintenance steps to keep moisture down. Most full jobs wrap in seven to fourteen days from start to finish.
- Rebuild
- Finish
- Walkthrough
Tools and Methods We Use
Move across a circle, or focus it and press Enter, for an illustrative thermal view of the photograph.
Thermal imaging camera
Finds temperature differences behind walls that indicate hidden moisture. We use it to locate leaks and mold growth without tearing open every surface.
Moisture meter
Reads exact moisture content in drywall, framing, and subfloor. We log readings before and after drying to confirm the structure is ready for rebuild.
Negative air machine
Pulls air out of the containment zone through a HEPA filter. This keeps spores from drifting into clean rooms while we work.
HEPA vacuum
Captures mold spores and fine debris from surfaces without releasing them back into the air. We vacuum every exposed cavity after removal.
Dri-Eaz dehumidifier
Removes moisture from the air inside containment. We run these alongside air movers until framing moisture drops below 16 percent.
Thermal views are illustrative, generated from the photographs.
Methods
Boroscope
A small camera that lets us see inside wall cavities and ductwork without cutting large openings. We use it to confirm mold growth before removal.
Fogger
Applies antimicrobial treatment in a fine mist that reaches corners and crevices a spray bottle cannot. Used after HEPA vacuuming on framing and sheathing.
IICRC S520 Standard
The industry standard for mold remediation that sets rules for containment, removal, cleaning, and clearance. We follow it on every job, which means documented moisture readings and lab-verified clearance before we rebuild.
Containment with polyethylene sheeting
We seal off the work zone with 6-mil polyethylene sheeting and negative air pressure. This keeps spores inside the containment and protects the rest of your home during removal.
Antimicrobial treatment with Fiberlock and Concrobium
After removal, we apply EPA-registered antimicrobial products to framing, sheathing, and subfloor. These stop regrowth on surfaces that stay in place. We also use Benefect and RMR-86 where appropriate.
HEPA filtration and air scrubbing
Air scrubbers with HEPA filters run continuously during remediation. They cycle the air in the containment zone, capturing spores and fine particles so they do not settle on clean surfaces.
When Dallas Homeowners Call Us
Burst pipe
A pipe bursts under the kitchen sink overnight and soaks the cabinet and adjacent drywall.
We extract standing water, set up air movers and a dehumidifier, and check the wall cavity with a moisture meter. If mold has started, we contain the area, remove affected drywall, and treat the framing.
Outcome: The kitchen is dry, mold-free, and rebuilt within a week. You avoid a much larger remediation bill down the road.
Storm water
A spring storm pushes water under the back door and soaks the baseboards and carpet in the living room.
We pull back the carpet, extract water from the pad, and check the baseboards and drywall with a thermal camera. Any moldy material comes out, and we dry the framing before reinstalling.
Outcome: The living room is restored with new baseboards and pad. Lab clearance confirms no mold growth remains.
AC overflow
The AC drain line clogs in July and water overflows the pan into the hallway ceiling.
We cut out the wet ceiling drywall, treat the framing above, and run dehumidifiers until moisture reads below 16 percent. New mold-resistant drywall goes up after clearance.
Outcome: The ceiling is repaired and painted to match. The AC drain gets cleared so the problem does not repeat next summer.
Musty odor
You notice a musty smell in the guest bedroom that gets worse when the AC runs.
We inspect the air handler and ductwork, take air samples, and check the bedroom walls with a moisture meter. If mold is in the ducts, we clean and sanitize the system.
Outcome: The odor is gone, air quality tests clean, and you know exactly where the moisture was coming from.
Pre-sale inspection
You are buying a home in Dallas and the inspection report flags possible mold in the attic.
We do a full inspection with thermal imaging and lab testing. You get a written report with photos and spore counts that you can use in negotiations or to plan the repair.
Outcome: You know the scope and cost before you close. No surprises after you move in.
How Residential Mold Remediation Runs in Dallas
Dallas homes face mold pressure from two directions: summer heat and spring storms. Attic temperatures above 140 degrees bake roof decking, and any slow leak from a roof flashing or AC drain line turns into mold within 48 to 72 hours. Spring storms drive rain sideways into brick veneer and around window frames, soaking wall cavities that stay wet for weeks.
Older homes in the M Streets and Kessler Park have galvanized supply lines that pinhole and drip inside walls. Newer builds in Uptown and Victory Park are tight enough that a small AC condensate overflow raises indoor humidity fast. We handle residential mold treatment Dallas homeowners need after all of these scenarios.
Whether you are in ZIP 75230 near Preston Hollow or 75236 in Oak Cliff, we know the housing stock and the moisture problems that come with it.
- Preston Hollow: Large older homes with mature trees. Roof leaks from fallen limbs and aging HVAC systems are common sources of attic and ceiling mold.
- Oak Cliff: Mix of historic and mid-century homes with crawl spaces. High humidity and poor ventilation make crawl space mold a frequent issue.
- Lakewood: 1920s to 1950s bungalows with original plumbing. Slow supply line leaks behind cabinets and in walls are a regular call.
- Uptown Dallas: Newer condos and townhomes with tight envelopes. AC condensate overflows and slab leaks can raise indoor humidity quickly.
- M Streets: Historic homes with pier-and-beam foundations. High humidity under the house feeds mold on floor joists and subfloor.
- Summer attic temperatures above 140 degrees: Heat speeds mold growth on roof decking and insulation. A small roof leak can contaminate a wide area in days. We prioritize attic inspections after any roof repair.
Walk-through and explanation of what we find Protect floors and set up containment Follow-up moisture checks and next steps
From problem to finished result.
Attic Mold After Roof Leak in Preston Hollow
Before: A spring storm damaged roof flashing and water ran into the attic for three weeks before the homeowner noticed dark staining on the ceiling below. Insulation was soaked, and mold covered roughly 200 square feet of roof decking.
After: We removed the wet insulation, treated the decking with antimicrobial spray, and ran dehumidifiers for four days. Lab clearance came back clean on the first test. New insulation and a roof repair were completed within ten days.
Check attic after any major storm and keep gutters clear. Fix roof flashing promptly. Run a dehumidifier in the attic during humid months if ventilation is limited.
Bathroom Mold From AC Drain Overflow in Oak Cliff
Before: The AC drain line clogged in July and overflowed the pan into the hallway ceiling. Water ran behind the bathroom wall for two weeks. Drywall showed black mold across a 6-foot section, and the musty smell filled the hallway.
After: We cut out the moldy drywall, treated the framing, and dried the cavity for three days. New mold-resistant drywall was installed, textured, and painted to match. Clearance testing confirmed no mold remained.
Pour a cup of vinegar down the AC drain line monthly during cooling season. Check the pan for standing water. Replace filters every 60 to 90 days.
Crawl Space Mold From High Humidity in Lakewood
Before: A 1940s bungalow had no vapor barrier, and floor joists were covered in white and black mold. The homeowner noticed a musty smell in the living room and squeaky floors. Moisture readings on joists were above 20 percent.
After: We removed mold from all joists and subfloor, installed a 12-mil vapor barrier, and set up drainage to move water away from the foundation. Moisture readings dropped below 14 percent. The musty smell was gone within a week.
Keep the vapor barrier intact and check it annually. Make sure downspouts discharge at least 6 feet from the foundation. Run a dehumidifier in the crawl space during humid months.
Problems We Solve for Dallas Homeowners
Mold shows up in different ways depending on where the water is coming from. Here are the most common problems we fix in Dallas County homes, and what happens if you wait.
- Hidden musty odorMusty odor with no visible moldThe smell means mold is growing somewhere you cannot see, usually inside a wall cavity or under flooring. By the time it becomes visible, the colony has been active for weeks. We use a thermal imaging camera and boroscope to find hidden moisture without tearing open every wall. Once we locate the source, we contain the area, remove affected materials, and treat the cavity. Lab testing confirms the mold is gone.
- Black mold on drywallBlack mold on drywall after a leakBlack mold on drywall usually means the paper facing has been wet for more than 48 hours. Drywall cannot be cleaned once mold roots into the paper. It has to come out. We cut out the affected section, bag it, and treat the framing behind it with antimicrobial spray. New mold-resistant drywall goes up after clearance testing. We match texture and paint so you cannot tell where the repair was.
- Attic roof leak moldMold in the attic from roof leaksAttic mold spreads fast in Dallas heat. A small roof leak can contaminate decking and insulation across a wide area before you notice anything from inside the house. We remove affected insulation, treat the decking and rafters, and fix the ventilation problem that let moisture build up. If the roof leak is active, we coordinate with a roofer before we close the job.
- HVAC spreading sporesHVAC system spreading mold sporesMold growing on the air handler coil or in ductwork pushes spores into every room each time the AC runs. This makes the whole house smell musty and can trigger allergies. We clean the air handler, coil, and drain pan, then HEPA vacuum duct interiors. Antimicrobial treatment goes on all surfaces. If ducts are too contaminated to clean, we replace the affected sections.
- Crawl space humidityCrawl space mold from high humidityDallas humidity keeps crawl spaces damp year-round. Without a vapor barrier, floor joists and subfloor stay wet enough to grow mold continuously. We remove mold from joists and subfloor, install a heavy-duty vapor barrier, and set up drainage to move water away from the foundation. This stops the moisture cycle that feeds regrowth.
Why Dallas Homeowners Call Us for Mold
A dry, mold-free home with lab results to prove it.
Moisture Source Stopped
Removing mold without fixing the water is wasted money. We trace the source with a moisture meter and thermal imaging camera, whether it is a roof leak, a supply line pinhole, or condensation on a duct. We document what we find and coordinate the repair so the growth does not return next season.
Containment That Protects Your Family
We seal off the work zone with polyethylene sheeting and run negative air machines so spores cannot drift into bedrooms or kitchens. HEPA air scrubbers cycle the room air continuously. For safe mold removal for families Dallas TX, this containment step matters more than any spray we apply.
Clear Scope Before Work Starts
You get a written scope listing exactly what gets removed, what gets cleaned, and what gets rebuilt. No surprise line items. If we find more growth once the wall is open, we stop, show you photos, and explain the added cost before we continue.
Rebuild Done by the Same Crew
We do not leave you with open walls and a phone number for a drywall guy. Our team hangs mold-resistant drywall, tapes, floats, and textures to match. One crew from containment through final paint means fewer scheduling gaps and a faster return to normal.
What you receive
Clear records you can keep and share.
Photo log
Before, during, and after photos of work
Moisture log
Daily readings showing drying progress
Scope sheet
Written list of what was removed and rebuilt
Understanding Mold Types and What They Need
Not all mold is the same. Knowing what you are dealing with helps you understand the scope.
Surface mold
Grows on visible surfaces like drywall and trim
- Wipes off but returns
- Usually from high humidity
- Common in bathrooms
Hidden mold
Grows inside wall cavities and under floors
- Musty odor is the clue
- Needs moisture meter to find
- Requires containment to remove
Structural mold
Rooted into framing, subfloor, or decking
- Cannot be cleaned off
- Requires removal of materials
- Needs lab clearance to confirm
Materials and surfaces we work with
- Drywall
- Insulation
- Framing
- Subfloor
- Ductwork
- Roof decking
- Trim
- Cabinets
Service ZIP codes.
A list like this tells people straight away whether you cover their street. Not listed? Call and ask: it only takes a minute.
- 75098
- 75287
- 75230
- 75231
- 75236
- 75237
- 75235
- 75254
- 75251
- 75252
- 75253
- 75043
Towns we serve.
Based in Dallas and covering the places around it. Pick one for local details.
- Downtown Dallas
- Uptown Dallas
- Oak Lawn
- Deep Ellum
- Lakewood
- Bishop Arts District
- Design District
- Preston Hollow
- Knox-Henderson
- Trinity Groves
- Victory Park
- East Dallas
Frequently Asked Questions About Residential Mold Remediation
Typical 2026 pricing depends on square footage affected, how much drywall and insulation comes out, and whether rebuild is included. We give you a written scope with line-item pricing before any work begins.
A single-room job usually takes three to five days from containment to clearance. Whole-home projects with attic or crawl space involvement run seven to fourteen days, including drying and rebuild. The drying phase alone takes two to four days because we wait for framing moisture to read below 16 percent before we close walls. Lab clearance adds 24 to 48 hours.
In most cases, yes. If the work zone is contained and you have a separate living area, you can stay. We seal the area with polyethylene sheeting and run negative air machines so spores stay inside the containment. For large jobs or if anyone in the home has asthma or a compromised immune system, we recommend staying elsewhere during the removal phase, typically one to three days.
It depends on the cause. Sudden events like a burst pipe or storm-driven water intrusion are often covered. Long-term neglect or slow leaks that went unfixed for months usually are not. We document everything with photos, moisture logs, and a written scope so your adjuster has what they need. We can also walk you through the claim process before you file.
Related Services
Other services from the same team.
- Apartment and Condo Mold RemediationMulti-unit buildings need coordination with property managers and tenants. We schedule around occupancy, contain each unit separately, and document everything for the HOA or management company. We also trace shared moisture sources like stack leaks and HVAC condensate lines.
- Mold Inspection and TestingWe use thermal imaging cameras, moisture meters, and boroscopes to find hidden moisture behind walls, under floors, and above ceilings. You get a written report with photos, lab results, and a clear scope of work before any remediation begins.
- Black Mold RemovalBlack mold removal Dallas TX requires containment first. We seal the work area with polyethylene sheeting, run negative air machines with HEPA filters, then remove affected drywall and insulation. Surfaces get HEPA vacuuming and antimicrobial spray. We verify with post-remediation testing before containment comes down.
Get Residential Mold Remediation in Dallas Started Today
If you see dark spots, smell something musty, or just had a water leak, call us. We inspect, test, and give you a written scope with pricing before any work begins. Same-day response across Dallas County.
Contact Dallas Mold Remediation
Call (214) 817 0145 or email info@dallasmoldremediation.com to schedule an inspection. We answer the phone Monday through Friday, 8:00 AM to 6:00 PM, and we return after-hours messages first thing the next morning. Same-day inspections are available across Dallas County when you call before noon.